Vektor Maskin Bipod Mount for Blaser R8

Finally, the Vektor Blaser R8 Bipod Mount has arrived. Fits Parker Hale, Versapod and similar designs. Installing the mount is very simple: 1. Remove the front sling stud, but leave the retaining screw in the stock with the washers in their original order under the screw head. 2.Place the shortest end of the bipod mount into the hole where the sling stud used to be. Engage the screw in the threads and pull the mount loosely into the stock. 3. Adjust orientation of the bipod mount. The sling interface should point downward/away from the barrel. Do this properly now, you only get one shot at correct alignment due to the two ears on either side of the threaded hole which are designed to cut its way into the stock material. 4. Tighten the screw. Observe that the bipod mount will move into the stock the same as the height of the ears as these cut their way into the stock. Weight: 15 grams Black, non-reflective surface coating Vektor Maskin Bipod mount. Fits Blaser R8