Cabot Serenity Max Damascus Double Stack 1911, 9mm, 5 in. Barrel, 17+1, Optics Ready, Matte Stainless/Polished Damascus, Pistol

Cabot Serenity Max Damascus Double Stack 1911, 9mm, 5 in. Barrel, 17+1, Optics Ready, Matte Stainless/Polished Damascus, PistolThe Cabot Serenity Max is a Damascus double stack 1911 in 9mm, built by hand in Cabot, Pennsylvania. It pairs a Serenity Damascus stainless steel slide with Cabot's proprietary stainless steel double stack frame and grip, then finishes the whole pistol in full matte stainless with the Damascus highs polished for contrast. The result is a working 9mm 1911 with the capacity of a modern double stack and the look of an heirloom piece.Every Serenity Max is hand fit, hand blended and hand finished. The Damascus slide is the centerpiece: each one shows its own flowing pattern, and polishing the high points against the matte stainless brings that pattern forward without losing the clean, durable surface of stainless steel. No two Serenity Max pistols look exactly alike.Inside the slide is a 5 in. Government length, match grade stainless steel barrel that is hand fit to the gun for accuracy and consistent lockup. Extraction is handled by the Cabot Advantage internal extractor. The trigger breaks at 3.5 lb, light and crisp the way a fine 1911 should be, and the hand fitting throughout gives the slide to frame feel Cabot is known for.The double stack frame and grip are Cabot's own design in stainless steel. The pistol ships with two 17 round magazines, and it uses STI/2011 compatible magazines, so spares and 20 round magazines are easy to find.This unit is set up for a red dot. It includes a Cabot RMR mount for optics with the Trijicon RMR footprint, along with the Cabot stainless ledge rear sight and Cabot stainless front sight. The ledge rear sight gives you a flat face for one hand manipulation off a belt or boot.It also carries the Cabot Double Stack Extended Magwell in matte aluminum. The magwell and stainless mainspring housing are machined from American billet 7075 aluminum and guide the magazine in fast during reloads, a real advantage in competition and on the range.Unloaded weight is 42 oz, enough steel to keep recoil soft and the sights settled on target shot after shot. The Serenity Max ships in a locking Cabot Nanuk hard case, ready for the safe, the range or the display case.Whether you want a double stack 1911 that runs hard at matches or a Damascus showpiece you will still want to shoot, the Cabot Serenity Max delivers both. Like every firearm we sell, it ships to a licensed FFL dealer for transfer, and you must meet all federal, state and local requirements to purchase it.Key FeaturesDamascus double stack 1911 in 9mm, made in Cabot, PA.Serenity Damascus slide, matte stainless with polished Damascus highs.5 in. match grade barrel, stainless, hand fit.3.5 lb trigger, hand blended and finished.2 x 17 round magazines, STI/2011 compatible.Cabot RMR mount included for Trijicon RMR footprint optics.Extended magwell, matte 7075 aluminum, included.Locking Cabot Nanuk hard case.SpecificationsManufacturerCabot GunsModelSerenity MaxPart NumberCABOT-SERENITYMAX-STAINLESS-9MMUPC306006001288ManufacturerCabot GunsModelSerenity MaxUPC306006001288TypeDouble stack 1911 pistolCaliber9mmCapacity17+1Magazines2 x 17 round, STI/2011 compatible (20 round available)Frame and gripCabot proprietary stainless steel double stackSlideSerenity Damascus stainless steelExtractorCabot Advantage internalBarrel5 in. Government, match grade, hand fit stainless steelTrigger3.5 lbFinishFull matte stainless with polished Damascus highsRear sightCabot stainless ledgeFront sightCabot stainlessOptic mountCabot RMR mount, Trijicon RMR footprint (included)MagwellCabot Double Stack Extended Magwell, matte 7075 aluminum, stainless mainspring housing (included)Weight42 oz unloadedCaseLocking Cabot Nanuk hard caseMade inCabot, PA, USATransferShips to an FFL dealerFAQsWhat caliber is it?9mm.What magazines does it use?STI/2011 compatible magazines. It ships with two 17 round magazines, and 20 round magazines are available.Is it optics ready?Yes. This unit includes a Cabot RMR mount for Trijicon RMR footprint optics.What is the barrel?A 5 in. Government length, match grade, hand fit stainless steel barrel.How heavy is the trigger?3.5 lb.Is every slide pattern the same?No. Each Damascus slide has its own pattern.Does it ship to my door?No. It ships to a licensed FFL dealer for transfer.Compare more pistols, red dot and holographic sights at ARMSAGORA's retailers.