COUNCIL TOOL Dayton Single 36in Curved Handle 3.5lb Bit Axe (35DR36C)

3.5 lb. Dayton pattern single bit axe with 36" curved wooden handle; Hand sharpened, tapered bit for cutting and splitting; Head coated with red enamel and cutting edges in clear lacquer to deter rust; 36" curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening; Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge; The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content; The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2" of the overall length of the handle is removed during assembly; ANSI Standards call for bit hardness of Rc 45-60, at least 1/2 inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and Council Tool's target 1-1/4 inches from the cutting edge; A full-sized felling axe for general axe chores. Cutting edge is approximately 4.75" of overall length and the poll is square; Forged tool steel head. Made in USA