Crickett 1-Piece Picatinny Scope Mount

This upgraded Picatinny style mount provides a longer mounting surface to utilize larger scopes or "red dot" style optics.Picatinny Style mount that accepts any weaver or picatinny style rings.Total length - 4 7/8"utilizes the same mounting procedure as the standard Crickett scope mountincludes mounting screwsdoes not accept 3/8" dovetail rings (Use KSA031 SCOPE MOUNT KIT with KSA054 CRICKETT SCOPE)NOT COMPATABLE with KSA054 CRICKETT 4 X 32 SCOPEInstallation Instructions:Remove the two 6A-48 plug screws on the front of the receiver and the 6A-32 screw and rear sight aperture from the rear sight elevation bar.Loosen the rear sight elevation screw (on side of the receiver.)Place mount base in position and start the two front 6A-48 screws and one rear 6A-32 screw.Continue to fully tighten the front two screws. Then tighten the one rear screw.Maintain down pressure on mount and tighten the elevation screw.Install and tighten any weaver or picatinny style rings and scope of your choice.