Lantac SmoothCam Domed Cam Pin 308/7.62 Heavy CP-R360-H

The Lantac SmoothCam Domed Heavy CP-R360-H is a cam pin for AR-10 bolt carrier groups chambered in .308 Winchester and 7.62x51mm NATO. It is designed to ride in the bolt carrier's cam channel and drive the bolt's rotation during the locking and unlocking cycle.

The pin is machined from 17-4 PH stainless steel and hardened to H900, roughly 45 HRC. Its head is polished for a smooth finish. The circular head has a single flat machined on the front face so it can be installed without removing the gas key, and two additional flats at 90 degrees to the front face are intended to reduce wear in the cam channel. The domed head curves away from the receiver's internal surface rather than forming a sharp upper corner. The part is left in its natural hardened state and has a copper/brass color.

• Platform: AR-10
• Calibers: .308 Winchester, 7.62x51mm NATO
• Fits: AR-10 bolt carrier groups (.308/7.62)
• Material: 17-4 PH Stainless Steel
• Finish: H900 hardened, polished head
• Color: Brass
• Brand: Lantac