Lee Precision, Inc. 5.7x28mm Rifle Full-Length Sizing 2-Die Set

The Lee 5.7x28 Steel 2-Die Set includes Full Length Sizing Die Bullet Seating Die Universal Shell Holder powder dipper and Instructions/Load data.If you wish to utilize a Lee Pro Auto-Disk or Auto-Drum Powder Measure with this die set you will need ;the short charging die LEE90668 (sold separately). Lee resizing lubricant is required with this die set.It has come to Lee's attention that 5.7 x 28 brass is now potentially fully annealed from case mouth to rim. ; This causes many issues with the reloading process. ;Lee's suggestion is to use Lee Resizing Lubricant and a Lee FN Shellholder. ;The rims are so soft that they cannot be resized with a standard universal shell holder as the brass rims deform and are pushed down into the .260" relief hole that is used for priming. ; Lee introduced FN Shell Holder LEE92183 for resizing this brass. ; The FN shellholder cannot be used to re-prime brass you will need to use the standard #15 shellholder to do this. ; Lee has ;also seen that the primers are staked or crimped into position. ; This maybe due to the brass being so soft that it does not have the ability to hold the primer into position via a slight press fit.The quick trim die uses a plastic bushing to provide a slight interference fit on the body of the cartridge to hold it stationary while trimming. ; This new brass is so soft the plastic bushing is deforming the brass.&nbs