Shooters Element CZ Scorpion EVO 3 S1 Reduced Weight Trigger Spring Kit

The HB Industries spring kit provides a 6.0lb trigger pull (down from 9.0+ lbs factory trigger). Simply remove your factory trigger and striker springs (#63 and #50 respectively on the factory parts diagram) and replace them with our application specific trigger and striker springs. Both springs in our kit must be used together. Gunsmith installation is recommended, but not required. NOTE: Many customers opt to also deburr and polish the working surfaces of the trigger components while replacing these springs; doing so will typically result in an even lower trigger pull weight and smoother trigger operation. Provides 6.0lb Trigger PullIncludes (1) Trigger Spring and (1) Striker SpringWire Ends Colored Orange for Easy Identification