Redding G-RX 40 S&W, 10mm Auto Base Sizing Die

The Redding G-Rx Base Sizing Die meets the need of the reloader needing to reload brass shot through some of the most popular autoloaders today. These autoloaders, when fired, produce a bulge at the bottom of the brass, which normal sizing dies can not reach and remove, rendering the brass unusable. Simply push the brass through the sizing die and the bulge in the web of the brass is removed. This step fully sizes the brass back within the accepted SAAMI specification for brass diameter. After the brass has been pushed through the die it may be resized in a standard sizing die allowing once unusable brass to be reloaded normally. Notes The G-Rx die set comes packaged with a pusher rod which fits into the ram like a shell holder and the unique push through sizing die with lock ring.To use simply place the brass on top of the pusher rod. Then raise the ram to push the brass entirely through the die. The resized brass is then held in a rebated portion of the die for easy removal. An op...