RISE Armament Anti-Walk Trigger and Hammer Pins AR-15

The RISE Anti Walk Trigger Pins set includes all of the following:One (1) trigger pinOne (1) hammer pin,Four (4) screwsTwo (2) Allen wrenches for easy installationAlso, the specs are as follows:Pin diameter .154 inchesPin material: Stainless steelBacked by lifetime guaranteeMade in AmericaThe torque spec on the screw is 11 inch-pounds maximum; however, 8 inch-pounds of torque is the recommended amount.Note: The external width of AR receivers varies in the trigger/hammer pin area, depending on the manufacturer. If the pins are too long for your receiver, you may shorten the pins a small amount by carefully filing material evenly from both ends of the pins. However, this is not required. Longer pins will not affect the function or performance of the rifle.The torque spec on the screw is 11 inch-pounds maximum; however, 8 inch-pounds of torque is the recommended amount.Note: The external width of AR receivers varies in the trigger/hammer pin area, depending on the manufacturer. If the pins are too long for your receiver, you may shorten the pins a small amount by carefully filing material evenly from both ends of the pins. However, this is not required. Longer pins will not affect the function or performance of the rifle.