Victron Energy MultiPlus-II Inverter/Charger 12VDC - 3000VA - 120VAC 2x120 or 120/240 Split - 50A Charge & Switch UL Approved One Size

Victron Energy MultiPlus-II Inverter/Charger 12VDC - 3000VA - 120VAC 2x120 or 120/240 Split - 50A Charge & Switch UL Approved One Size. It has all the features of the MultiPlus plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.PowerAssistThe MultiPlus-II will prevent overload of a limited AC source such as a generator or shore power connection. First battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.ESS: Energy Storage SystemsThe MultiPlus-II is the key component in a Victron ESS system providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual.Uninterrupted AC power (UPS function)In the event of a grid failure or when shore or generator power is disconnected the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world using the free VRM app and free VRM portal website. Access can be from a phone tablet laptop or PC for multiple operating systems. There is no end to the level of control from adjusting your Multi to auto-starting a backup generator and more.Specifications:PowerControl & PowerAssist: YesTransfer Switch: 50AMaximum AC Input Current: 50A (each leg)Inverter Specifications:DC Input Voltage Range: 95 17 VOutput: Output Voltage 120 VAC 2percent / Frequency 60 Hz 01percent (1)Continuous Output Power at 25C (3): 3000 VAContinuous Output Power at 25C: 2400 WContinuous Output Power at 40C: 2200 WContinuous Output Power at 65C: 1700 WMaximum Apparent Feed-In Power: 2500 VAPeak Power: 5500 WMaximum Efficiency: 93percentZero Load Power: 13WZero Load Power in AES Mode: 15WZero Load Power in Search Mode: 4WCharger Specifications:AC Input (Split Phase): 180-280 VAC 45 65 HzAC Input (Single Phase): 90-140 VAC 45 65 HzCharge Voltage 'Absorption': 144 VCharge Voltage 'Float': 138 VStorage Mode: 132 VMaximum Battery Charge Current (4): 120 ABattery Temperature Sensor: YesGeneral Specifications:Auxiliary Output: 35 A Each legExternal AC Current Sensor (optional): 100 AProgrammable Relay (5): YesProtection (2): a gVE.Bus Communication Port: For parallel split phase and three phase operation remote monitoring and system integrationGeneral Purpose Com. Port: Yes 2xRemote On-Off: YesOperating Temperature Range: -40 to +65C (-40 150 F) (fan assisted cooling)Humidity (Non-Condensing): Max 95percentEnclosure Specifications:Material & Color: Steel blue RAL 5012Protection Category: IP22Battery-Connection: 2x2 M8 bolts120 V AC-Connection: Screw terminals 21 mm (4 AWG)Weight: 22 kgDimensions (hxwxd) (mm): 578 x 275 x 148Standards:Safety: EN-IEC 60335-1 EN-IEC 60335-2-29Emission Immunity: EN 55014-1 EN 55014-2 EN-IEC 61000-3-2 EN-IEC 61000-3-3 IEC 61000-6-1 IEC 61000-6-2 IEC 61000-6-3Note: For a short period of time this product was called MultiGrid-II.Please contact your dealer for any returns repairs or support issues related to this product. Package Contents: Victron Energy MultiPlus-II Inverter/Charger 12VDC - 3000VA - 120VAC 2x120 or 120/240 Split - 50A Charge & Switch UL Approved Victron Energy PMP122305100: MultiPlus-II Inverter/Charger 12VDC - 3000VA - 120VAC 2x120 or 120/240 Split - 50A Charge & Switch UL Approved One Size