4 ea Black 1911 Slim Grip BUSHINGS / 8 ea O Rings | US Made for Colt and Clones | Patented Design Prevents Loose Grip Screws | Hex Drive Makes These Very Easy to Install and Remove
Brand Challis Grips
MPN BO-SCB-4
UPC 080687719280
MSRP $24.99
We sometimes use affiliate links in our content which could grant us a comission. This comes at no additional cost to you, but supports the platform and keeps it free.
Retailers
Similar Products
Description
COMPLETE SET of Challis Grips 1911 Slim Hex Drive Grip Screw Bushings, Custom Bushing O-Rings, and Grip Screw O-rings (4 of each).
STRONG and SECURE. The patented hex drive and o-ring design provide the most secure grip mounting available. Unlike conventional bushings with a screwdriver slot, the hex head is strong enough to drive the bushing firmly into place without the risk of raising a burr or otherwise deforming the top of the bushing. SEE CUTAWAY PHOTO
EASY and ACCURATE. The bushings can be installed quickly. Just slip one into the socket of a 7/32” nut driver and turn it into place. Since the socket holds the bushing in proper alignment, it is easy to accurately engage the threads. There is no need to start the bushing by hand and then finish the job with a driver.
REMOVABLE and REUSABLE. The bushing can be easily removed with a 7/32” nut driver or socket. No special removal tools, no easy-outs and no trashed bushings or damaged frames. If needed, the bushings can be removed for refinishing the frame and reinstalled, eliminating the need to purchase replacement bushings.
This SLIM SIZE bushing will work with grips not less than 0.190" thick. For thicker grips, see our full size. We also offer extra-slim.
STRONG and SECURE. The patented hex drive and o-ring design provide the most secure grip mounting available. Unlike conventional bushings with a screwdriver slot, the hex head is strong enough to drive the bushing firmly into place without the risk of raising a burr or otherwise deforming the top of the bushing. SEE CUTAWAY PHOTO
EASY and ACCURATE. The bushings can be installed quickly. Just slip one into the socket of a 7/32” nut driver and turn it into place. Since the socket holds the bushing in proper alignment, it is easy to accurately engage the threads. There is no need to start the bushing by hand and then finish the job with a driver.
REMOVABLE and REUSABLE. The bushing can be easily removed with a 7/32” nut driver or socket. No special removal tools, no easy-outs and no trashed bushings or damaged frames. If needed, the bushings can be removed for refinishing the frame and reinstalled, eliminating the need to purchase replacement bushings.
This SLIM SIZE bushing will work with grips not less than 0.190" thick. For thicker grips, see our full size. We also offer extra-slim.
Related Categories