Comstock Armory Ultralight Recessed Titanium Plan-B Suppressor Mount 1/2x28

Comstock Armory Ultralight Recessed Titanium Plan-B Suppressor Mount, 1/2x28The Comstock Ultralight Recessed 1/2-28 Mount is a purpose-built component for shooters assembling a compact, repeatable Plan-B-pattern suppressor mounting system. It combines Grade 5 titanium, a PVD finish and clearly defined tool flats to support secure installation and convenient suppressor attachment. The product uses 1/2-28 threads and is compatible with common .900-24 Plan-B-pattern adapters, including the Comstock LPA, Q Plan-B and Rearden Atlas.The recessed body sits back over the barrel to minimize overall system length while retaining a common .900-24 Plan-B-pattern suppressor interface. Its titanium construction keeps front-end weight exceptionally low, making it well suited to lightweight rifles, compact hosts and builds where balance matters.Ready to complete your suppressor-mounting setup? Review fitment, confirm compatibility and add the Comstock Ultralight Recessed 1/2-28 Mount to your cart at ARMSAGORA's retailers.Minimal Length and WeightThis mount is purpose-built for shooters who want a simple Plan-B interface with almost no added muzzle length. The symmetrical profile does not require timing, and the titanium body provides a strong, corrosion-resistant mounting component without the mass of a conventional steel muzzle device.Key Features and SpecificationsModel: ULR-12Primary thread/interface: 1/2-28Material: Grade 5 titaniumFinish: PVDWeight: 0.7 ozOverall profile: 0.9 inAdded system length: less than 0.1 inInstallation interface: 13/16 in wrench flatsCaliber/bore guidance: any bullet diameter/caliber, subject to the complete suppressor systemMounting compatibility: common .900-24 Plan-B-pattern adapters, including the Comstock LPA, Q Plan-B and Rearden AtlasFitment and Installation GuidanceFits barrels up to 0.750 in diameter and works with the SIG taper cap; check the outside diameter of other taper-shoulder adapters. Before attaching any suppressor, verify bullet stability and confirm that the muzzle device, adapter and suppressor are concentric. Use an appropriate alignment rod and follow the current installation instructions supplied by Comstock Armory. Some suppressor manufacturers limit warranty coverage when aftermarket mounts or muzzle devices are used, so review the suppressor manufacturer's warranty and compatibility requirements before installation.Get yours today at ARMSAGORA's retailers. Choose the correct configuration, verify your complete system and purchase the Comstock Ultralight Recessed 1/2-28 Mount from a trusted online retailer.Frequently Asked QuestionsWhat mounting system is the ULR-12 designed for?It is designed around the Plan-B-pattern ecosystem and the specific 1/2-28 interface listed above. Compatibility depends on the complete suppressor, adapter, muzzle-device and barrel configuration.Does the Ultralight Recessed mount need to be timed?No. The rotationally symmetrical design is intended to install without timing shims. Use the correct tools and follow the manufacturer's torque instructions.How do I confirm suppressor fitment before firing?Check every thread specification, available blast-chamber depth, muzzle-device length and caliber rating. After installation, verify alignment with a proper alignment rod and follow all firearm, ammunition and suppressor manufacturer instructions.Use only on a compatible firearm and suppressor system. Installation should be performed by a qualified person when the user is not fully familiar with muzzle-device or suppressor-mount installation.Product IdentificationManufacturer SKU: ULR-12UPC: 850069580377Shop the Comstock Armory ULR-12 at ARMSAGORA's retailers.