Evolution Gun Works Trijicon RMR Sight Mount CZ 75 75 SP-01 Phantom Shadow 85 97B 97D P01 PCR and Tristar P120 1.780in Aluminum Matte Black Hardcoat

Mounting Hardware is Included This mounts fits: CZ 75 CZ 75B CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow* CZ 85 CZ 97B CZ 97D CZ P-01 CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120 This mount does not fit: CZ P-07 CZ P-09 *We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application. Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots. FEATURES Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64&';&'; allen wrench for installation.