ADE RD3-028-P ARES PRO MOTION AWAKE Red Dot with 3.5 MOA Dot and Weather Shield System for Optics Ready Pistol/Optic Plate that is compatible with Doctor/Vortex Venom/Burris Fastfire Footprint/pattern

ADE is releasing the 2023 PRO SERIES that are Sensor Activated/Awake for ADE RD3 series fits a varieties of popular footprint on the market. With Motion Activated System, while the Ares Pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has the option to manually turn the red dot power off to disable the Motion Activated System. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Side Battery Load System, no need to Remove the sight to change the Battery. The removeable Weather Shield protects the sight from moisture and provides a clearer sight picture during inclement weather. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun. The overall length is longer, and it only fits on the optic plate that sits above the slide, typically the plates replacing the rear sight. It does not sit into the optic cut. 1.84" length x1.30" width x1.15" height. Shockproof, Fogproof. 3.5MOA red dot. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 Comes with a removeable picatinny plate, lens cloth, instruction, tool, battery. ADE RD3-018 Spike, RD3-021 Nuwa fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint ADE RD3-006, RD3-009, RD3-012, RD3-013 fit Optic cut/optic plate that is compatible with Doctor/Vortex Venom/Viper/Burris Fastfire footprint