Area 419 Zero M-Series Sizing Die .300 PRC with Zero Shell Holder

Area 419 Zero M-Series Sizing Die Features The Area 419 Zero M-Series Sizing Die for .300 PRC was engineered as a 1-1/4 inch die built specifically for use with a Hybrid turret or a 1-1/4 inch turret on the Zero press or other compatible presses. It cannot be used with a 7/8 inch turret or standard press and it requires a Zero M-Series shellholder with a larger diameter rim rather than a standard shellholder. Area 419 built this die after years of testing and research into what reloaders need from a sizing die drawing on their experience both as reloaders and as makers of the Zero Reloading Press. The result is a die intended to produce consistent match grade brass while remaining straightforward for reloaders who are still building their skills. Area 419 approaches reloading equipment as part of an interconnected system where the press die brass and rifle all need to be designed with one another in mind rather than treated as separate components. The Zero M-Series Sizing Die reflects that philosophy built to size .300 PRC brass with consistency shot after shot once paired with the correct Zero shellholder. At roughly 3 pounds and sized to fit a 9 by 6 by 2 inch footprint in a reloading bench setup it is a compact but purpose built tool for serious precision reloading. For handloaders chasing repeatable accuracy from their .300 PRC rifle this die is engineered to remove guesswork from the sizing process. Area 419 Zero M-Series Sizing Die Specifications Manufacturer: Area 419 Model: Zero M-Series Sizing Die Caliber: .300 PRC Reloading Die Type: Neck Sizer Die Dimensions: 9 x 6 x 2 Weight: 3 lbs Available At: ARMSAGORA