Home / UTG Pro / Product

UTG Pro US Made 1" /2Pcs Med. Profile Poi Airgun/.22 Rings

UTG Pro US Made 1" /2Pcs Med. Profile Poi Airgun/.22 Rings - UTG Pro
Brand UTG Pro
MPN RDU012515
MSRP $44.34
We sometimes use affiliate links in our content which could grant us a comission. This comes at no additional cost to you, but supports the platform and keeps it free.
Retailers
Amazon Amazon $44.34
Similar Products
UTG Pro Us Made 30mm/2PCS Medium Profile POI Picatinny Rings - UTG Pro

UTG Pro Us Made 30mm/2PCS Medium Profile POI Picatinny Rings

$41.62
UTG Pro
UTG 1"/2PCs Low Pro Max Strength Picatinny Rings, 18mm Wide - UTG

UTG 1"/2PCs Low Pro Max Strength Picatinny Rings, 18mm Wide

$24.39
UTG
UTG 1PC Medium Profile Airgun Mount with Stop Pin, 1" Dia , Black - UTG

UTG 1PC Medium Profile Airgun Mount with Stop Pin, 1" Dia , Black

$17.66
UTG
UTG unisex adult UTG ACCU SYNC 30mm Medium Pro 50mm Offset Picatinny Rings, Matte Black, Medium US - UTG

UTG unisex adult UTG ACCU SYNC 30mm Medium Pro 50mm Offset Picatinny Rings, Matte Black, Medium US

$39.90
UTG
UTG unisex adult UTG ACCU SYNC 30mm Medium Pro 34mm Offset Picatinny Rings, Matte Black, Medium US - UTG

UTG unisex adult UTG ACCU SYNC 30mm Medium Pro 34mm Offset Picatinny Rings, Matte Black, Medium US

$33.80
UTG
UTG ACCU-SYNC™ 1" High Profile 50mm Offset Pic. Rings, Red - UTG

UTG ACCU-SYNC™ 1" High Profile 50mm Offset Pic. Rings, Red

$34.99
UTG
UTG 1PC Medium Profile Airgun Mount with Stop Pin, 30mm Dia - UTG

UTG 1PC Medium Profile Airgun Mount with Stop Pin, 30mm Dia

$17.66
UTG
Description
Original snag-free contoured profile with reduced weight and size Machined from 6061 aircraft aluminum and 4605 steel with a matte black finish Medium profile precision optics interface (P.O.I) rings have a 28mm center height to fit 1 inch tube optics with up to a 55mm outer objective diameter Progressively Machined and precise inner diameter to achieve a seamless interface between the scope ring and tube To RX screw locking side plate Controlled by dual spring loaded guide rods precisely clenches dovetail rail for a secure and repeatable zero hold Removable threaded recoil stop-pin provides an additional interface point with the dovetail rail for added security against bidirectional recoil NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.