Sig P365 to Trijicon RMR Steel Red Dot Adapter Plate
Brand Athena Precision
MSRP $65.00
We sometimes use affiliate links in our content which could grant us a comission. This comes at no additional cost to you, but supports the platform and keeps it free.
Retailers
Similar Products
Description
Fits: Sig P365 to RMR. **May fit other models, listed is what we've tested.**
All mounting hardware needed comes with the order.
Material: Precision machined, heat-treated 4140 alloy steel.
Finish: Coated with a copper phosphate to aid in corrosion resistance.
Hardware: (included) M3 x 0.5 x 8mm & 4-40 x 5/16 screws.
Install instructions for Sig P365 to RMR plate: 1- Make sure the surfaces and threads are clean. Apply a light coat of oil or grease to the adapter plate to prevent rusting. 2- Thread Locker 222 (purple) is recommended. No red, green, or blue should be used. 3- Put a drop of 222 on the internal threads and on the thread's screws. 4- Use the supplied M3 x 0.5 x 8mm & 4-40 x 5/16 screws. 5- Very Important Note: Use a reliable torque driver set 17 IN. LBS 6- Allow to cure for 24 hours.
All mounting hardware needed comes with the order.
Material: Precision machined, heat-treated 4140 alloy steel.
Finish: Coated with a copper phosphate to aid in corrosion resistance.
Hardware: (included) M3 x 0.5 x 8mm & 4-40 x 5/16 screws.
Install instructions for Sig P365 to RMR plate: 1- Make sure the surfaces and threads are clean. Apply a light coat of oil or grease to the adapter plate to prevent rusting. 2- Thread Locker 222 (purple) is recommended. No red, green, or blue should be used. 3- Put a drop of 222 on the internal threads and on the thread's screws. 4- Use the supplied M3 x 0.5 x 8mm & 4-40 x 5/16 screws. 5- Very Important Note: Use a reliable torque driver set 17 IN. LBS 6- Allow to cure for 24 hours.
Related Categories