Smith and Wesson M&P 2.0 to 509T Steel Red Dot Adapter Plate, Black
Brand Athena Precision
MSRP $70.00
We sometimes use affiliate links in our content which could grant us a comission. This comes at no additional cost to you, but supports the platform and keeps it free.
Retailers
Similar Products
Description
Fits: S&W M&P 2.0 to HLOSN 509T. All mounting hardware needed comes with the order. **May fit other models, listed is what we've tested.**
All mounting hardware needed comes with the order.
Material: Precision machined, heat-treated 4140 alloy steel.
Finish: Coated with a copper phosphate to aid in corrosion resistance.
Hardware: (included) 6-32 x 5/16 Screws.
Install instructions - M&P 2.0 adapter plate: 1- Make sure the surfaces and threads are clean. Apply a light coat of oil or grease to the adapter plate to prevent rusting. 2- Thread Locker 222 (purple) is recommended. Absolutely no red, green, or blue thread lockers should be used. 3- Put a drop of 222 on the internal threads and on the thread's screws. 4- Use the supplied 4-40 and 4-48 screws. 5- Very Important Note: Use a torque driver set 10-13 IN. LBS. 6- Allow to cure for 24 hours.
All mounting hardware needed comes with the order.
Material: Precision machined, heat-treated 4140 alloy steel.
Finish: Coated with a copper phosphate to aid in corrosion resistance.
Hardware: (included) 6-32 x 5/16 Screws.
Install instructions - M&P 2.0 adapter plate: 1- Make sure the surfaces and threads are clean. Apply a light coat of oil or grease to the adapter plate to prevent rusting. 2- Thread Locker 222 (purple) is recommended. Absolutely no red, green, or blue thread lockers should be used. 3- Put a drop of 222 on the internal threads and on the thread's screws. 4- Use the supplied 4-40 and 4-48 screws. 5- Very Important Note: Use a torque driver set 10-13 IN. LBS. 6- Allow to cure for 24 hours.
Related Categories